20F Type - Differential Pressure Control Valve

This maintains the differential pressure of supply and return lines or the differential pressure of the inlet and outlet side of an instrument in a closed circuit

Features

• As an air-to-close differential pressure valve, it has a structure where the valve opens when the primary pressure goes up. It is installed in between the supply header and return header to control the differential pressure.
• As a self-control type, it does not require auxiliary power supply.
• As a complete balancing type, almost no changes in the set differential pressure resulting from pressure fluctuations.
• Structure is relatively simple, and offers superb durability.
• Convenient piping and handling.
• Separated diaphragm from the main body, not affected by temperature, resulting in outstanding durability

Specification:

• Type: YDP-20F
• Applicable pressure: Maximum 2.0MPa
• Applicable fluid : Cold/hot water
• Fluid temperature : 170℃ below
• Differential pressure control range:  0.05~0.30MPa & 0.30~0.50MPa 
• Leakage allowance: 0.5% less of rated flow
• Direction of installation: Horizontally or vertically
• End connection : KS 20K RF FLANGE
• Materials:
  • Body: SCPH2
  • Disc, Seat: STS
  • Diaphragm: EPDM
• Hydraulic test pressure : water pressure 3.0MPa

▶ When using the valve, install a strainer (40 MEsh or more) on the leaflet.
▶ 1kPa = 0.001 MPa