Instructions on how to properly install the pressure gauge

1. Installation location When installing, it is recommended to choose a location that minimizes the effects of vibration, temperature and humidity in the environment to prolong the service life and avoid making equipment errors. A place that is dry and away from direct heat sources such as a boiler is an ideal location to install the unit.

2. How to mount the device

Absolutely do not affect the meter to screw the device into the pipe. It is recommended to use a wrench to attach the threaded part. Depending on the supplier, additional washers may be used to help secure the device.

3. Equipment protection If the medium is vapor, it is necessary to install a siphon containing water to attach between the equipment and the pipeline to avoid the influence of vapor on the equipment. When the temperature is too high, the accuracy of the device may be affected.

4. Additional installation It is recommended to install an opening and closing valve to facilitate the removal of equipment or a needle valve on the pipeline so that the pressure can be adjusted. The pressure through the device should not exceed 75% of the total oil.