8.How to Read a Steam Table
Saturated Steam Tables
A saturated steam table is an indispensable tool for any engineer working with steam. It's typically used to determine saturated steam temperature from steam pressure, or the opposite: pressure from saturated steam temperature. In addition to pressure and temperature, these tables usually include other related values such as specific enthalpy (h) and specific volume (v).
The data found in a saturated steam table always refers to steam at a particular saturation point, also known as the boiling point. This is the point where water (liquid) and steam (gas) can coexist at the same temperature and pressure. Because H2O can be either liquid or gas at its saturation point, two sets of data are required: data for saturated water (liquid), which is typically marked with an "f" in subscript, and data for saturated steam (gas), which is typically marked using a "g" in subscript.
Example of Saturated Steam Table |
---|
Legend:
|
Heating processes using steam generally use the latent heat of evaporation (Hfg) to heat the product. As seen in the table, this latent heat of evaporation is greatest at lower pressures. As saturated steam pressure rises, the latent heat of evaporation gradually decreases until it reaches 0 at supercritical pressure, i.e. 22.06 MPa (3200 psi).
Two Formats: Pressure Based and Temperature Based
Since saturated steam pressure and saturated steam temperature are directly related to one another, saturated steam tables are generally available in two different formats: based on pressure and based on temperature. Both types contain the same data that is simply sorted differently.
Pressure Based Saturated Steam Table
Press. (Gauge) |
Temp. | Specific Volume | Specific Enthalpy | |||
---|---|---|---|---|---|---|
kPaG | °C | m3/kg | kJ/kg | |||
P | T | Vf | Vg | Hf | Hfg | Hg |
0 | 99.97 | 0.0010434 | 1.673 | 419.0 | 2257 | 2676 |
20 | 105.10 | 0.0010475 | 1.414 | 440.6 | 2243 | 2684 |
50 | 111.61 | 0.0010529 | 1.150 | 468.2 | 2225 | 2694 |
100 | 120.42 | 0.0010607 | 0.8803 | 505.6 | 2201 | 2707 |
Temperature Based Saturated Steam Table
Temp. | Press. (Gauge) |
Specific Volume | Specific Enthalpy | |||
---|---|---|---|---|---|---|
°C | kPaG | m3/kg | kJ/kg | |||
T | P | Vf | Vg | Hf | Hfg | Hg |
100 | 0.093 | 0.0010435 | 1.672 | 419.1 | 2256 | 2676 |
110 | 42.051 | 0.0010516 | 1.209 | 461.4 | 2230 | 2691 |
120 | 97.340 | 0.0010603 | 0.8913 | 503.8 | 2202 | 2706 |
130 | 168.93 | 0.0010697 | 0.6681 | 546.4 | 2174 | 2720 |
140 | 260.18 | 0.0010798 | 0.5085 | 589.2 | 2144 | 2733 |
150 | 374.78 | 0.0010905 | 0.39250 | 632.3 | 2114 | 2746 |
Different Units: Gauge Pressure and Absolute Pressure
Saturated steam tables can also use two different types of pressure: absolute pressure and gauge pressure.
- Absolute pressure is zero-referenced against a perfect vacuum.
- Gauge pressure is zero-referenced against atmospheric pressure (101.3 kPa, or 14.7 psi).
Saturated Steam Table using Absolute Pressure
Press (Abs.) |
Temp. | Specific Volume | Specific Enthalpy | |||
---|---|---|---|---|---|---|
kPa | °C | m3/kg | kJ/kg | |||
P | T | Vf | Vg | Hf | Hfg | Hg |
0 | -- | -- | -- | -- | -- | -- |
20 | 60.06 | 0.0010103 | 7.648 | 251.4 | 2358 | 2609 |
50 | 81.32 | 0.0010299 | 3.240 | 340.5 | 2305 | 2645 |
100 | 99.61 | 0.0010432 | 1.694 | 417.4 | 2258 | 2675 |
Saturated Steam Table using Gauge Pressure
Press. (Gauge) |
Temp. | Specific Volume | Specific Enthalpy | |||
---|---|---|---|---|---|---|
kPaG | °C | m3/kg | kJ/kg | |||
P | T | Vf | Vg | Hf | Hfg | Hg |
0 | 99.97 | 0.0010434 | 1.673 | 419.0 | 2257 | 2676 |
20 | 105.10 | 0.0010475 | 1.414 | 440.6 | 2243 | 2684 |
50 | 111.61 | 0.0010529 | 1.150 | 468.2 | 2225 | 2694 |
100 | 120.42 | 0.0010607 | 0.8803 | 505.6 | 2201 | 2707 |
Gauge pressure was created because it is often easier to reference measured pressure against the pressure we normally experience.
Steam tables based on gauge pressure indicate atmospheric pressure as 0, while steam tables based on absolute pressure indicate it as 101.3 kPa (14.7 psi). Also, to distinguish gauge pressure from absolute pressure, a "g" is typically added to the end of the pressure unit, for example kPaG or psig.
Converting Gauge Units to Absolute Units |
---|
For SI UnitsSteam Pressure [kPa abs] = Steam Pressure [kPaG] + 101.3 kPa For Imperial UnitsSteam Pressure [psi abs] = Steam Pressure [psiG] + 14.7 psi |
Important note: Problems can easily occur when absolute pressure is mistaken for gauge pressure (or vice versa), so it is always extremely important to pay close attention to the pressure units used in the table.
Summary Table |
---|
Gauge pressure:
Absolute pressure:
|
*Atmospheric pressure is 101.3 kPa (14.7 psi)
Superheated Steam Tables
Values related to superheated steam cannot be obtained through a regular saturated steam table, but rather require the use of a Superheated Steam Table. This is because the temperature of superheated steam, unlike saturated steam, can vary considerably for a same pressure.
In fact, the number of possible temperature-pressure combinations is so great that it would be virtually impossible to gather them all in a single table. As a result, a large number of superheated steam tables use representative pressure-temperature values to form a summary table.
Example of Superheated Steam Table |
---|
The above superheated steam table contains data about Specific Volume (Vg), Specific Enthalpy (Hg) and Specific Heat (Sg) at typical values of pressure and temperature. |
Related News
Analysis of TOZEN Japan's Industrial Valves
20/05/2024
TOZEN is one of Japan's leading manufacturers specializing in industrial valves. With over 70 years of experience, TOZEN has built a global reputation for exceptional product quality, advanced technology, and outstanding customer service. TOZEN's products are widely used in various industries, including oil and gas, chemicals, power generation, water supply, and wastewater treatment.
Tozen PTFE Expansion Joints: The Ultimate Solution for Harsh Environments
20/05/2024
Tozen, a leading Japanese brand, has established itself as a pioneer in providing high-quality piping solutions, including PTFE expansion joints. With over 50 years of expertise in the industry, Tozen has earned a reputation for delivering durable, efficient, and safe PTFE expansion joints catering to diverse industries.
Tozen Stainless Steel Flexible Joints: The Ultimate Solution for Piping Systems
20/05/2024
Tozen, a leading Japanese brand, has established itself as a pioneer in providing high-quality piping solutions, including stainless steel flexible joints. With over 50 years of expertise in the industry, Tozen has earned a reputation for delivering durable, efficient, and safe stainless steel flexible joints catering to diverse industries.
Tozen Rubber Expansion Joints: A Comprehensive Overview
20/05/2024
Tozen is a leading Japanese brand that provides effective vibration isolation solutions for piping systems. Tozen's rubber expansion joints are manufactured from high-grade synthetic rubber materials, combined with advanced technology, to deliver exceptional durability and performance, meeting the diverse needs of customers across various industries.